News:

Please do have a browse through the forums or use the Search functionality before posting a new topic - chances are there is already a discussion underway on that subject, or your question has already been answered previously!

Main Menu

what did you pass your PSV/PCV test in?

Started by Wumpty, October 07, 2012, 08:52:40 PM

Previous topic - Next topic

Wumpty

Which bus did you pass your test in?

Mine was M1429 - C429BUV
Autofare 3 - the ticket that laughs in the face of contactless!

andy

http://www.flickr.com/photos/timthemix/5940139302/

The one on the right!!  I started off in a Bedford YRT coach that they were using at the time but after a day the gearbox went (it wasn't my fault!) and they sent this over, it was supposed to have been retired already and I was one of the last people to learn and pass in it. My training was in the middle of a heatwave, I have never sweated so much in my life...It was like 5 days in the gym! This was also before the days of 3 or 4 to a bus, my training was 6 hours a day 1 to 1.

Can you believe we had people trying to get on it? It was open platform and there wasn't much you could do as the instructor was sat down at the front behind me.

Tony

I passed my test in one of these two
http://www.flickr.com/photos/22455491@N02/2316732215/
They are RRR 912 & RRR 913.

913 passed to a private driver training company based at the Fox & Goose

mranon

I passed mine on a weeks course in duple bodied b58 lww 5p. It went well too. Did have some tuition from my then employer using a ford r1114 ex nash's nil6337. I passed 1st time at 18, and the ford became my regular steed until they went all volvo, and i was allocated a b10m, also ex nashs.

Wumpty

Quote from: Tony on October 07, 2012, 09:19:55 PM
I passed my test in one of these two
http://www.flickr.com/photos/22455491@N02/2316732215/
They are RRR 912 & RRR 913.

913 passed to a private driver training company based at the Fox & Goose

there's an error message saying photo not found :(
Autofare 3 - the ticket that laughs in the face of contactless!

DC3

9262 [lynx] and 9929 [metro] when in training, 9505 [B10] actual test.

Tony

#6
Quote from: Wumpty on October 08, 2012, 09:54:01 AM
Quote from: Tony on October 07, 2012, 09:19:55 PM
I passed my test in one of these two
http://www.flickr.com/photos/22455491@N02/2316732215/
They are RRR 912 & RRR 913.

913 passed to a private driver training company based at the Fox & Goose

there's an error message saying photo not found :(

Finds it for me when I select the link.

Here is a better photo of RRR 912, the one I passed my test in

http://www.flickr.com/photos/dickdapre/6103789531/

and here is a better photo of RRR 913

http://www.flickr.com/photos/dickdapre/6103789337/

dayvid

VOLVO B10L GAS BUS converted to diesel at Walsall Garage.

midlandred2003


j_rp_wright

I passed in one of the Leyland linx and did my manual in a Dennis Javelin

John

I apologise bringing back a dead topic, but I passed in 9508

Mike K

Quote from: John on January 09, 2014, 07:22:58 PM
I apologise bringing back a dead topic, but I passed in 9508

Not been on the forum so much lately so didn't know you'd passed your test John, congratulations. Are you based at Perry Barr now?

John

Quote from: Mike K on January 11, 2014, 10:28:27 PM
Quote from: John on January 09, 2014, 07:22:58 PM
I apologise bringing back a dead topic, but I passed in 9508

Not been on the forum so much lately so didn't know you'd passed your test John, congratulations. Are you based at Perry Barr now?

Thanks Mike. Yes I am going to Perry Barr next week. It'll be nice to finally get there and start working properly

vinh1000

Quote from: John on January 12, 2014, 07:29:02 AM
Quote from: Mike K on January 11, 2014, 10:28:27 PM
Quote from: John on January 09, 2014, 07:22:58 PM
I apologise bringing back a dead topic, but I passed in 9508

Not been on the forum so much lately so didn't know you'd passed your test John, congratulations. Are you based at Perry Barr now?

Thanks Mike. Yes I am going to Perry Barr next week. It'll be nice to finally get there and start working properly
Nice and ngood luck :)
Do ya know which rota/board you are doing? :)

John

Quote from: vinh1000 on January 12, 2014, 02:27:54 PM
Quote from: John on January 12, 2014, 07:29:02 AM
Quote from: Mike K on January 11, 2014, 10:28:27 PM
Quote from: John on January 09, 2014, 07:22:58 PM
I apologise bringing back a dead topic, but I passed in 9508

Not been on the forum so much lately so didn't know you'd passed your test John, congratulations. Are you based at Perry Barr now?

Thanks Mike. Yes I am going to Perry Barr next week. It'll be nice to finally get there and start working properly
Nice and ngood luck :)
Do ya know which rota/board you are doing? :)

Thanks Vinh1000
No not yet, should find out on Wednesday  :D

SMF spam blocked by CleanTalk